Rope Slings

Approx. Rs 75,000 / PieceGet Latest Price

Product Details:

Description:

• Bind the rope from the end at a distance equal to the loop desired, plus an additional length of about 10 times the diameter of the rope .split the rope by separating three adjacent strands, leaving the other three strands and core intact. Bend the large section(three strands core ) into the desired size loop and start laying the three separated strands in to the grooves of the bent section,as close to the throat as possible.
• Completely lay the three strands around the loop as deep into the throat as possible. allowing the six strands ends and the core to project close to the throat of the loop.
• In application of pressed-on ferrule is rolled in eye splice. Noticed how smooth the fabric is joined.
• Position the special ferrule over the rolled in splice in preparation for swaging. Ends are still flats.
• By administration of tremendous force by swaging machine, ferrule is tapered.

Wire Rope Press –Grip Sling Are
Economical –Safer And Easier To Work With

Three slings you can count on high strength efficiency on all eye splices.they are tapered and completely sealed with at both end to avoid snagging on loads. these ferrules completely cover all strands and locks them securely into place. there are no opening or rough projection to catch on hands. Rope slings with special pressed –on metal ferrules are easier to work with.
Slings are made from 6x19 wire rope and from 6x37 wire rope. We recommended use of 6x19 construction. Upto 1 ¼”:6x37or large slings.

Approx. Rs 2,000 / PieceGet Latest Price

Product Details:

Approx. Rs 1,850 / PieceGet Latest Price

Product BrochureProduct Details:

We are leading Manufacturer and supplier of wire rope sling of various types according to customers requirement in very good price it will be with test certificate.

Note:

The capacity indicated in the above table, for basket hitch and choker itch is for guidance only, vertical column is the actual load the slings can be tested and certified in other words safe working load is applicable for vertical lift only.

Product Price :Get Latest Price

Product Details:

Butt SpliceThe two ends of the rope should be joined together by two five –tuck splices.Number of TucksThe splices shall be tucked three times the full size of strand, a fourth time with the strand each reduced to half the original number and a fifth with the strands each further reduced to one third the original number. The heart strand is to be rowed in during tucking so that a double heart is produced for at least the length of the first three tucks in both directions.Method of TuckingThe Tucks of the Splice shall be made over one strand and under one strand against the lay of the rope. The heart strand of the rope shall not be removed when the strands are opened out for tucking, but may be cut to a suitable length.FinishingThe ends of the splice in way of the twisted – off ends of wire that is between the end and the third tuck shall be tightly served with seizing wire, after parcelling with canvas, Hessian or wax paper.

Product Price :Get Latest Price

Product Details:

Application for Grommat

Grommat slings can be fabricated in very short circumstances. The reason is this: Grommat slings are made from one continuous length of strand or wire rope. This requires only one tuck-in point as compared with six tuck-in points needed manufacturer an endless sling.

A Grommat consists of an endless rope having construction 6/1 construction & is used where high ultimate breaking strength of the rope is required beyond the limits of a single part rope.

A strand of sufficient length to complete the Grommat shall be obtained by either of the following methods:

Method A: An order strand shall be unlaid from a specimen of 6/1 rope conforming to the requirement of the customer.

Method B: Unlaying from a specimen of 6/4 rope having strands in all respects equipment to those obtained by method A above.

Method C: Using a virgin strand either prefromed or post formed & in all other respects equivalent to those obtained by method A & B.

During the course of construction of a Grommat the performed lay of the strand shall be maintained and shall not be interfered with except when laying in the core for which purpose length of strand left to form the core should be straightened .

The length of the strand required to form a Grommat shall be equal to about 7.5 times the parameter of the Grommat in case of spliced Grommat. But in case of complete streamline splicing length shall be 4 times the effective length.

 

Approx. Rs 2,500 / PieceGet Latest Price

Product Details:

We are supplying in used mechanical pressed wire rope sling in various length as per buyers requirement.

Approx. Rs 17,500 / PieceGet Latest Price

Product Details:

Rating

• Single Branch slings

Single branch slings shall have a working load limit equal to that of the Chain used in their construction

• Multi Branch slings 

Multi branch slings shall be rated at a uniform working load limit for an angle between branches of 90o-120o(45o- 60o to the vertical) or additionally a ta uniform working load limit for any angle between branches of 90o-120o(45o- 60o to the vertical ).

Uniform Load Method

• Double branch slings

For all angles between branches from 0°- 90° (0°- 45° to the vertical)
WLL = 1.4 x WLL of a single branch made from similar chain. When additionally marked for angles between branches of 90°- 120° (45°- 60° to the vertical)
WLL = 1 x WLL of single branch made from similar chain.
 

• Three and four branch slings

For all angles between branches from 0°- 90° (0°- 45° to the vertical)
WLL = 2.1 x WLL of a single branch made from similar chain. When additionally marked for angles between branches of 90°- 120° (45°- 60° to the vertical)
WLL = 1.5 x WLL of single branch made from similar chain.

Dos:

• Select correct size of sling for the load, taking into account the included angle & possibility of unequal loading in case of multi- leg slings.
• Ensure that chain slings are not twisted.
• Ensure the load is fully supported in the bowl of the hook, not on tip.
• Avoid snatch or sudden loads.
• Get your slings inspected by competent person at regular intervals.
• Keep register for all slings in use.

Dont's

• Leave slings on the floor when not in use. Hang them on hook.
• Use sling over sharp corners without protective padding
• Trap the sling under a load.
• Use slings which are torn, bent, corroded, locked, stretched or damaged.
• Knot a chain.
• Heat treat grade 80 slings. This is unnecessary & could be dangerous.

 

Effect of Temp. on chain slings

• Slings used at elevated temperatures
• Sometimes Grade 80 slings may have to be used in conditions where the chain is subjected to higher temperature. The table below gives a general guideline of reduction in working load limit at elevated temperature. We do not recommend the use of chain 0 slings above 400 C.

 

 

Approx. Rs 17,500 / PieceGet Latest Price

Product Details:

We are leading Manufacturer and supplier of Multi Leg wire rope slings of various types and capacity according to customers requirement in very good price it will be with test certificate.